guide question

We have a good many rod builders here and also those with much to offer about reels, so if you need help with Rods-Reels- or Wrapping do it here
Post Reply
snapper slayer
Weekend Warrior
Posts: 60
Joined: Thu Sep 16, 2010 10:06 pm
Location: Winnipeg, Manitoba, Canada

guide question

Post by snapper slayer »

what spacing and how many of these nonfouling guides/what sizes should I use for a 9 ft bridge conventional. calstar 900h

http://www.mudhole.com/Shop-Our-Catalog ... ard-Chrome
are these good guides?

thanks

snapper slayer
Weekend Warrior
Posts: 60
Joined: Thu Sep 16, 2010 10:06 pm
Location: Winnipeg, Manitoba, Canada

Re: guide question

Post by snapper slayer »

no one?

snapper slayer
Weekend Warrior
Posts: 60
Joined: Thu Sep 16, 2010 10:06 pm
Location: Winnipeg, Manitoba, Canada

Re: guide question

Post by snapper slayer »

thanks

snapper slayer
Weekend Warrior
Posts: 60
Joined: Thu Sep 16, 2010 10:06 pm
Location: Winnipeg, Manitoba, Canada

Re: guide question

Post by snapper slayer »

generally what size of tip then
it does not specify on the blank im looking at. it is 20-40lb line class

User avatar
CubanExpress
Boatlessfishing.com FORUM SPONSOR
Posts: 2006
Joined: Wed Sep 27, 2006 1:06 am

Re: guide question

Post by CubanExpress »

I think the tip on the 900h blank is too thin for those bulky non fouling conventional guides.

Unless you can find some in a thinner gauge wire, going with a fuji style guide might be a better route to go with.

Post Reply

Return to “Rod & Reels & Wraps”