finding the spline on a 2 piece blank
-
- Fisher
- Posts: 13
- Joined: Tue Jul 07, 2009 10:47 am
finding the spline on a 2 piece blank
Any ideas on how to find the spline on a 2 piece spinning rod blank? This is a Rainshadow 8'ft 2pc md-fast
- STRIZ
- KING MACKEREL
- Posts: 871
- Joined: Wed Mar 12, 2014 2:18 pm
- Location: WAY OUT THERE
Re: finding the spline on a 2 piece blank
Spline each piece individually. Mark the bottom piece at the top and the top piece at the bottom. Bring together and with temporary guides stress it good with as much weight as you dare. Do not jam the pieces slam dunk together so the blank can work itself out.
If it adjusts itself the change the marks.
Find your guide placement at the same time. Mark all up and wrap away.
If it adjusts itself the change the marks.
Find your guide placement at the same time. Mark all up and wrap away.
KEEP YOUR HEAD UP HIGH
EVEN WHEN THE NECK IS DIRTY
EVEN WHEN THE NECK IS DIRTY