Page 1 of 1
rod for 9/0
Posted: Thu Aug 27, 2015 7:09 pm
by whitemamba24
I will start off by saying im a pretty new fisherman, and an even newer shark fisherman, so i am open to any and all criticism. I just bought myself a penn 9/0 senator for shark fishing from the beach and i'm wondering what rod to put it on, the 2 rods that have stood out to me is a 7' 50-80# X-Heavy star rod, and a 6' 50-80# chaos rod, that being said i have no idea if either of these are actually good rods, and if they are then what one is better. I am also open to other rod suggestions, i'm willing to pay up at 175$ so it doesnt have to be dirt cheap.
Re: rod for 9/0
Posted: Mon Sep 07, 2015 6:58 pm
by chris21
hello! between the 2 rods you listed I would go for the 7 footer, but me personally when I did have a 9/0 senator I had it on a 9ft custom crowder rod and it was absolutely amazing! that was my preference but a 7ft med/heavy action rod will do just fine, good luck!
Re: rod for 9/0
Posted: Mon Sep 07, 2015 8:55 pm
by fishnfool73
Rods will be short to use on the beach. Where do you live ?
Re: rod for 9/0
Posted: Tue Sep 08, 2015 9:12 am
by LINESIDER
might have a semi custom around pm me number ill txt u after work
Re: rod for 9/0
Posted: Sat Sep 12, 2015 11:42 pm
by whitemamba24
i live in sarasota, i kayak out my baits so casting isnt a issue.
Re: rod for 9/0
Posted: Sun Sep 13, 2015 3:44 pm
by fishnfool73
Length in this case isn't for casting. It is for keeping your line out of the weeds on the beach and out of the beach break.
Re: rod for 9/0
Posted: Wed Sep 16, 2015 1:13 am
by whitemamba24
ahhhhh ok, well there's no weeds out there, but there is one very large sandbar that i might need height to clear. Most of my fishing is at turtle beach, which way back when they dug the area directly in front of the beach out, so we ended up with a sandbar that plummets down to 15ft of water only like 100 ft from shore. This large sandbar makes for some fantastic shark fishing luckily, but the water does go from like 6 ft deep up too 2.5 ft deep down to 15 ft, making for an awkard time getting fish over it.
Re: rod for 9/0
Posted: Wed Sep 16, 2015 9:59 am
by permitchaser
Again where do you live ? I have a 7' 2'' a brand new blank totally solid ,I could build it for you for $150 ,foul proof guides ...if you want turbo guides will b a little more ,aluminum reel seat ,you select colors marble or wrap ..
I bought a whole bunch of 8 FOOTERS for spinning or conv rods 30 to 50 lbs test
Re: rod for 9/0
Posted: Wed Sep 16, 2015 10:20 am
by permitchaser
i bought if for a 6/0 its to beefy...you could flip a shark if the line don't brake lol
Re: rod for 9/0
Posted: Wed Sep 16, 2015 12:41 pm
by whitemamba24
oh, sorry thought i mentioned. I live in Sarasota FL, im willing to drive a bit if necessary. you can PM me and we can discuss the details.
Re: rod for 9/0
Posted: Wed Sep 16, 2015 3:30 pm
by permitchaser
Its a long drive....pm sent