sinkers made to order ..

diggin4grouper · **Posted:** Sat Nov 26, 2011 1:49 pm

i going to start selling a few sinkers from time to time , price will be 2.00 a lb + 12.00 for shipping , the way this will work is you tell me what you want out of what i can make , and ill pm my address to you and you can send a postal money order and i will ship them out to you in a usps flat rate box up to 65 lbs . the 2.00 a lb is firm , i was asked by someone if they bought more than 30 lbs if i would lower it and i did and i haven't heard from them again so one bad apple spoils the bunch . if i get a bunch of orders i will will post closed on the a post and will reopen when i get them done ...

here is what i am able to make

Egg Sinker

1/4 - 3/8 - 1/2- 3/4 - 1 - 1 1/2 - 2 - 3 -4 -5 OZ'S

Bell Sinker with Brass Eye

1/4 - 3/8 - 1/2 - 5/8 - 3/4 - 1 - 1 1/2 - 2

No Roll Sinker

1 - 1 1/2 - 2 - 3

Pyramid Sinker with Brass Eye

1 - 1 1/2 - 2 - 2 1/2 - 3

Bank Sinker

3 ,4 , 5 oz this is an old penn sport mold and some have the spues on the eye , i will clean them as best as i can before sending them

fixed80 · **Posted:** Wed Dec 14, 2011 12:57 pm

tears143 · **Joined:** Wed Sep 14, 2011 1:49 pm **Posts:** 258

Ordered some sinkers from him and it came here in a timely manner and the sinkers are very nice! Will order again when the fish and rocks steal all of these sinkers.

chris21 · **Posted:** Wed Feb 29, 2012 12:31 am

I would be interested in buying a 25lb box of 5 oz bank sinkers for surf fishing!!

diggin4grouper · **Posted:** Wed Feb 29, 2012 9:28 am

pm sent !

rare · **Posted:** Wed Feb 29, 2012 11:06 am

David,

Have you looked at the V. jig molds? :idea:

diggin4grouper · **Posted:** Wed Feb 29, 2012 2:47 pm

rare wrote:

David,

Have you looked at the V. jig molds? :idea:

i have but im still undecided if i want to get into that because if i did i would have to invest like 400.00 just in the molds, wire forms , solid ring's or split rings . plus there would be a few that would want them colored , and thats like another 150.00 for powder coating and then an oven to bake the paint .

if i did it, might start out with a flutter jig in 5 ,7 ,9 oz unpainted

i would have to charge like 2.50 each or something to get my money back with unpainted ones

rare · **Posted:** Wed Feb 29, 2012 5:24 pm

$2.50 is not bad. Slap on some color reflective tape and good to go!!!

crashmister · **Joined:** Thu Feb 05, 2009 8:48 am **Posts:** 4164

diggin4grouper wrote:

rare wrote:

David,

Have you looked at the V. jig molds? :idea:

i have but im still undecided if i want to get into that because if i did i would have to invest like 400.00 just in the molds, wire forms , solid ring's or split rings . plus there would be a few that would want them colored , and thats like another 150.00 for powder coating and then an oven to bake the paint .

if i did it, might start out with a flutter jig in 5 ,7 ,9 oz unpainted

i would have to charge like 2.50 each or something to get my money back with unpainted ones

David, got the sweetest little powder coater. Shoot me a PM, pretty simple to make. With a little work, you can put together a set.

Made this one for a friend.

rare · **Posted:** Wed Feb 29, 2012 6:34 pm

3 way bong, cool! Now I see why you haven't been on the board...

diggin4grouper · **Posted:** Wed Feb 29, 2012 7:33 pm

crashmister

pm sent , nice fluid beds there

malibuminix · **Joined:** Tue Sep 02, 2008 9:03 pm **Posts:** 328

Just received my sinkers. Awesome transition a good deal as well.Thanks Dave.

diggin4grouper · **Posted:** Sat Mar 17, 2012 1:17 pm

malibuminix wrote:

Just received my sinkers. Awesome transition a good deal as well.Thanks Dave.

your welcome , look forward to doing it again

David

fishnfool73 · **Joined:** Tue Nov 07, 2006 6:18 am **Posts:** 10053

I am looking for some 8 oz banks and eggs are you making any that big yet ?

diggin4grouper · **Posted:** Wed Apr 04, 2012 12:59 pm

fishnfool73 wrote:

I am looking for some 8 oz banks and eggs are you making any that big yet ?

sorry no im not yet ! im trying to get new stuff , but as the price of leads goes up it takes a bit longer than i expected ,

David

joenofishhere · **Joined:** Tue May 11, 2010 2:29 pm **Posts:** 226

Got a big box of lead in the mail from David Wednesday for my Tortugas trip this summer! Just wanted to say thanks for the prompt shipment, and great communication from the beginning.

diggin4grouper · **Posted:** Fri Apr 27, 2012 2:47 pm

now available

6 and 8 oz banks

gruntking · **Posted:** Fri Apr 27, 2012 3:11 pm

bout damn time

diggin4grouper · **Posted:** Fri Apr 27, 2012 4:38 pm

gruntking wrote:

bout damn time

hey im trying give me a break j/k , but ya have to figure i only make about a .25 a pound off yall it takes a while to get 50 bucks to get a new mold but im trying to get new stuff when i can , i try to be fair with every one i deal with and keep the cost down to a price people can afford . if yall will bare with me i will continue to get new molds in when i can

David

diggin4grouper · **Posted:** Mon Apr 30, 2012 12:51 pm

well i had some free time a wanted to check how the new mold was speed the new mold needed to be poured at so i made a batch of 10 lbs each 6 and 8 oz's im real impressed with this mold even though i cant use my bottom pour pot , the pour pot will leave wrinkle marks in them and they look like crap so it turkey fryer for this mold , here's what they look like

8 oz's

6 oz's

get your order in now these are nice and clean holes

rare · **Posted:** Mon Apr 30, 2012 12:55 pm

They are very nice and clean, David. :toast:

diggin4grouper · **Posted:** Mon Apr 30, 2012 12:57 pm

rare wrote:

They are very nice and clean, David. :toast:

thanks RARE

rare · **Posted:** Mon Apr 30, 2012 12:58 pm

Let me check what I got left and if I need to restock I will hit you up! :toast:

diggin4grouper · **Posted:** Mon Apr 30, 2012 12:59 pm

rare wrote:

Let me check what I got left and if I need to restock I will hit you up! :toast:

sounds like a plan ! :thumright:

sepaik · **Posted:** Mon Apr 30, 2012 6:38 pm

Got any 8 or 10 Oz eggs?

diggin4grouper · **Posted:** Mon Apr 30, 2012 6:44 pm

sepaik wrote:

Got any 8 or 10 Oz eggs?

not yet , my next mold i get will be 6 and 8 oz eggs and after that it will be 10 and 12 oz , just bare with me as i get the ones yall are asking for ! and as i get them in i will post it like i did with the new banks ...

sepaik · **Posted:** Mon Apr 30, 2012 6:51 pm

diggin4grouper wrote:

sepaik wrote:

Got any 8 or 10 Oz eggs?

not yet , my next mold i get will be 6 and 8 oz eggs and after that it will be 10 and 12 oz , just bare with me as i get the ones yall are asking for ! and as i get them in i will post it like i did with the new banks ...

Thanks! The boys bound for the Tugas need them!

diggin4grouper · **Posted:** Mon Apr 30, 2012 6:58 pm

sepaik wrote:

Thanks! The boys bound for the Tugas need them!

the highest egg i can make right now is a 5 oz , wish i could help ya out , but im trying to get the molds in the order they were asked for thats the only way i know to do it to be fair to others here ...

diggin4grouper · **Posted:** Thu May 03, 2012 5:13 pm

UPDATE

just got back from ordering the mold for 6 and 8 oz egg weights , should be here in about a week ....

Chevy Juan · **Posted:** Thu May 03, 2012 5:22 pm

Sounds good David that will be big for you dude. I need to stock up soon as well man.

sinkers made to order ..

Who is online