line type/strength for pomp jigging
-
- Fisher
- Posts: 42
- Joined: Sat May 24, 2014 8:15 pm
line type/strength for pomp jigging
I'm curious what line strength youall use when jigging for pompano? Ive got my rods loaded with 16lb Sakuma nite crystal.
- gatorjwade
- Old Salt
- Posts: 382
- Joined: Mon Nov 12, 2007 11:41 am
- Location: Boca Raton, FL
Re: line type/strength for pomp jigging
I'd go with that or a bit lighter... 14# or 12#.
I'm sure some folks would go even lower, especially if you're using the lightest of pomp jigs.
I'm sure some folks would go even lower, especially if you're using the lightest of pomp jigs.
Jeff
- gatorjwade
- Old Salt
- Posts: 382
- Joined: Mon Nov 12, 2007 11:41 am
- Location: Boca Raton, FL
Re: line type/strength for pomp jigging
Oh, I suppose I should add more...
I strongly prefer light braid (10 or 15), with a 20# floro leader.
I strongly prefer light braid (10 or 15), with a 20# floro leader.
Jeff
-
- Fisher
- Posts: 42
- Joined: Sat May 24, 2014 8:15 pm
Re: line type/strength for pomp jigging
Keep in mind that 16 lb Sakuma has the same diameter as 11 lb Ande.Its famous as a distance casting line in the UK and its becoming popular in coastal NC.